
Chris

hello!
i have a question 
Can i install the Sentra SE-R auto axle into a manual tranny?
Or is the lenght other?
I have problems to install my axle!
thanks!
Offline



According to partsamerica.com they use different axles.
***edit**
also depends on whether vehicle has abs or not too
Last edited by tramsell (2008-10-14 17:59:38)
Offline


they should be different.... so i would think not
Offline

Anthony



I doubt they would be the same. Why not just get the axle made for the Spec V?

Offline

Chris

Is at auto the driver side axle shorter and the passenger side longer in relation to manual axle?
thanks for your help!
Last edited by GermanAlmera (2008-10-15 04:04:22)
Offline


it should be, but it also goes with diameter of the splines and how close they are..... call your nearest dealership and ask if you really want to be sure
Offline

Do you already have the axle? Have you tried putting it in, already? Abs doesn't really matter, it just means it has a ring on it for the speed sensor. The axle should be the same besides that.
Offline

Chris

My Car have ABS but the axle not
Its not a problem my budddy drill it down 
But i think the auto and manual axle must be have a other lenght.
At the Nissan Service Manual (Sentra) can i see that the auto tranny have a other size than the manual tranny!
I must press my passenger side HOODLEDGE-LOWER to install my VQ35 into my Sentra XE.... thats not right! 
Offline

Kurt Kennedy



They will be different. ABS Also might play a role.
just get the right one?
Online

michael

I replaced my right front drive axle about 3 months ago. I had about 90k on the car. Again..... i live in Boston so i am sure that helped it along... You can order it from NAPA, thats where Nissan gets their axles from. Instead of paying 400 plus , you can pay about 150 ish.
Offline

brandon



i just bought one for 70 from advanced auto, and abs dont matter, my driver side axle i replaced has abs, it will work wether or not you have abs. and only the se-r/spec v axles will work the other one has smaller splines on either end.

Offline