
Thomas

Another quarter is in the books, and quite the success! With a new prelims & final voting rounds, well over 200 votes were turned in for each round. Congratulations to Heidi Gurov - cute02spec - for her slim victory with her 2002 Nissan Sentra SE-R Spec V "HQR."
Sporting the new Racing Solution RS lip kit and weight-reducing carbon fiber, Heidi cruised to victory with the first ever HQR (07 crank swapped) Spec V, on mismatched wheels and stock suspension no less!
Turbo | Fuel System | Alchol Injection:
• Precision GT3251 turbo
• Boost Logic Turbo Blanket Heat Shield
• Protech Fabrication Turbo Manifold
• Protech Fabrication 2.5" Downpipe and midpipe
• Precision intercooler
• Powertech Imports intercooler piping
• Tial 38mm wastegate w/6.6psi spring
• GReddy Type S blow off valve
• ATP Turbo Oil Inlet Restrictor
• Goodridge Oil feed & return lines
• Nissport oil adapter
• DEI Thermotec Exhaust Wrap (on manifold and downpipe)
• KP Performance 1/2" Wire Heat Sleeving
• Engine Runup Stage 1 150 PSI Alcohol Injection Kit with Cooling Mist ShurTank
• Golden Eagle Vacuum Manifolds
• MSD 660cc high impedance fuel injectors
• Aeromotive fuel pressure regulator
Internal Engine:
• 2007 QR25DE crankshaft
• Balancer Shaft Removal
• Secondary "butterfly" valve assembly removed
Standalone Engine Management:
• Spectre EMS Pro management
• Chevrolet LS1 Coilpacks
• Camaro spark plug wires
• Custom crank trigger wheel
• Nissan Altima KA24DE drive by cable throttle body
• Nissan B15 Sentra GXE/SE gas pedal assembly and throttle cable
• WRP Technology throttle body spacer (tapped for air intake temp sensor)
Other Engine:
• NGK IX Iridium Spark Plugs
• Nismo Cat-Back Exhaust
• Power Gaskets Insulated Intake Gasket
• Throttle Body Coolant Bypass
• Spectre stainless steel breather filter
• Unorthodox Racing Lightened Crank Pulley
• WRP Technology power steering underdrive pulley
• Gutted upper thermostat
• Timing Advanced +2 on stock ECU (doesn't apply now)
• Raised Idle on stock ECU (doesn't apply now)
• Nismo Radiator Cap
• Hello Kitty Oil Cap
• Upgraded Battery Terminals
Transmission:
• Technafit Stainless Steel Braided Clutch Line
• Clutchmasters FX400 6 Puck Clutch (Stage 4, Ceramic)
• Fidanza Lightweight Aluminum Flywheel
• Redline Synthetic Gear Oil
Suspension | Braking | Wheels:
• Energy Suspension Polyurethane Motor Mount Inserts (Front motor mount only)
• Technafit Stainless Steel Braided Brake Lines
• Power Slot front and rear rotors
• Axxis Ultra High Performance ceramic front and rear brake pads
• 17”x7" Exel F-1 Wheels in gunmetal with Toyo Proxes FZ4 215/45/17 Tires (Street)
• 15"x7" Team Dynamics Pro Race 1 wheels in black with BFGoodrich g-Force T/A 225/50/15 drag radials (track, front wheels only)
• Specless 4point trunk brace
• Eibach Anti-Roll kit (courtesy of Cardomain/Eibach)
• Solid steel rear motor mount
• "$4 Wheel Hop Mod"
Gauges | Other Electronics:
• A’PEXi SAFC-2 (as a knock gauge)
• Zeitronix ZT-2 Wideband O2 Meter and Datalogger
• Zeitronix EGT Sensor
• Zeitronix 3.5 Bar MAP Boost Sensor
• Raptor Shift Light
• Greddy V2 Boost, Oil Pressure, Fuel Pressure, and Oil Temperature Gauges mounted in iEquus Performance & Autometer 2" Gauge Cups
• GReddy Full Auto Timer
• GReddy Profec B Spec II electronic boost controller
• 7" In-Dash Car Touch Screen LCD VGA/Video
• Lilliput TC-1000 CarPC (Datalogging, tuning, and ICE)
• Gyration Cordless Optical Air Mouse and Compact Keyboard
Cosmetic | Lighting Modifications:
• OEM-styled Carbon Fiber Hood
• VIS Racing carbon fiber trunk lid
• VIS Racing carbon fiber spoiler
• Racing Solution front and rear lip kit
• Custom Nismo Graphics Kit
• OnStar Antenna
• Red Underdash Neons
• Custom Enterprise Chrome Gauge Rings
• 35% Window Tint
• Painted Taillights, Brake Calipers, & Valve Cover
• APC Sport Pedals
• APC Leather Shift Boot
• Sylvania Silverstar Headlight & Fog Light Bulbs
• Sylvania Silverstar Parking/Turn Signal bulbs
Audio:
• Rockford Fosgate Audio Fanatic Package (stock) 


Not to be forgotten is 2nd Place finisher sentricity, with his 2003 turbo Spec V, and 3rd Place finisher r0nnii, with his 2005 Spec V in a unique "red panda" look. SilverBoost and 2k4Spec finished 4th and 5th, respectively in the final voting round.
See in you November for the Winter 2008/2009 contest!
Offline








Thanks to everyone who voted for me! I assumed I would never have a chance at winning one of these things!
3 silvers in a row! woot woot!

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

Michael





hiedi for president
Offline








Oh gawd, I wouldn't want that job... although going on vacation with taxpayers money is a nice thought 

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

mario





Online

Eric



Congratz to you Heidi!!!
You def deserve it. 











Online

Michael





cute02spec wrote:
Oh gawd, I wouldn't want that job... although going on vacation with taxpayers money is a nice thought
Sentricity for president!
Offline

Erik




Congrats Heidi!
Silver is the best! 

Online

ror



CONGRATS!
wait, she cant win, she has no maf!
lol
jk
Last edited by omar (2008-08-25 01:56:22)

Online








Actually, i DO have a MAF! otherwise I'd have a gap in the intercooler piping 

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

Matt Pitt


congrats on winning with your monster truck
btw you should try pushing that dent out of your front bumper, heat it up with a blow dryer and push it out from behind.



Offline

Bryan


Congrats Heidi!


Offline

Anthony


congrats, just can't wait to see that thing fully tuned, to she what she'll do!
Offline

Allen




Online








The Pitt wrote:
congrats on winning with your monster truck
btw you should try pushing that dent out of your front bumper, heat it up with a blow dryer and push it out from behind.
I've had the car for almost 4 years... don't you think we have we already tried it... numerous times?! It won't push out no matter what.

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

Matt Pitt


cute02spec wrote:
The Pitt wrote:
congrats on winning with your monster truck
btw you should try pushing that dent out of your front bumper, heat it up with a blow dryer and push it out from behind.
I've had the car for almost 4 years... don't you think we have we already tried it... numerous times?! It won't push out no matter what.
didnt know it was that old of a dent, just tryin to help geez 



Offline








That dent was there when I bought the car in 2005... so who knows how old it really is...

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

Brian


cute02spec wrote:
The Pitt wrote:
congrats on winning with your monster truck
btw you should try pushing that dent out of your front bumper, heat it up with a blow dryer and push it out from behind.
I've had the car for almost 4 years... don't you think we have we already tried it... numerous times?! It won't push out no matter what.
sledge hammer...lol 
o...and congrats on winning

Offline








Thanks everyone 
Ooo... I gotta use this, it's a funny smiley....

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

Josh



Congrats on the title. Your car has come along nicely.
Offline

Geoff


yay heidi! congrats on the win. thought you would win!

Offline

Terence




congrats cute02! Big things next !
Offline








I hope so Terence! 

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline




congrats....now get that kitty on the dyno...

Offline

Kevin




Congrats!


Offline

Jeff



congrats heidi. the name heidi gurov sounds retarded so HEIDI it is. YAY! nice car btw, stealin my crank and corvette coilpacks... 
Offline

no thanks on the different rims. Get new rims and get rid of both lol
Online








if i had my stock wheels here, i could do a photoshoot with 4 different wheels/set ups all at once
one slick, one drag radial, one stock, one aftermarket 17 

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

yeah wheres some dyno sheets and videos of it going vroom? lol
Online








videos are on youtube, no dyno yet.

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

David Pereira

is your motor built also? Sleeves, pistons, rods?
Offline








cute02spec's wicked awesome parts list wrote:
Internal Engine:
• 2007 QR25DE crankshaft
• Balancer Shaft Removal
• Secondary "butterfly" valve assembly removed
Nope, don't see any on the list of modifications.

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline
Pages: 1