







Here are the non-custom cams (camshafts) available for 2002-2006 Spec V.
Jim Wolf Technology (JWT): http://www.jimwolftechnology.com/custom … PartID=434
Part # ASER2-QRNS1
Price: $596.00
Claimed* HP: 8+
Nismo R-Tune: http://www.nissanusa.com/pdf/microsites … atalog.pdf
Part #13020-RNB55
Price: $800.00 (MSRP)
Claimed* HP: Not listed
Brian Crower: http://www.briancrower.com/
Part #BC0262
Price: ?
Claimed* HP: ?
*Claimed means what the manufacturers claim, and real results may differ

Snailed and Built (in progress) http://www.cardomain.com/ride/2191509 Offline

Matt Pitt


Found these in another thread, i do believe there are more available from BC then posted here.
Also here is the before/after dyno for the two intake cam setup http://myspecv.com/f/t165441-2-intake-cams-dyno.html
Brian Crower
264 degrees intake duration/.425 intake lift
256 degrees exhaust duration/.400 exhaust lift
JWT cam specs:
264 degrees intake duration/ .447 intake lift
244 degrees exhaust duration/ .376 exhaust lift
Nismo cam specs:
262 degrees intake duration/.440 intake lift
242 degrees exhaust duration/.370 exhaust lift
Stock cam specs:
244/.407 intake
232/.340 exhaust
.
Last edited by The Pitt (2008-08-31 14:35:48)



Offline

so ive looked all over for dyno sheets on each.... if someone could please link/post their dyno sheets with a list of mods they had at the time of dyno and what cams they were using i would really appreciate it!!!
Offline

Nathan



Ive heard bc are the best.

Offline

yeah i was just looking for some hard #'s thanks in advance
Offline

Richard Greer



atomicguy7 wrote:
Ive heard bc are the best.
If I had a spec, and had a choice I would go with a JWT Intake Cam and Brian Crower Exhaust Cam.
Offline

Don



speedjunkie wrote:
atomicguy7 wrote:
Ive heard bc are the best.
If I had a spec, and had a choice I would go with a JWT Intake Cam and Brian Crower Exhaust Cam.
And you base that on what?
Offline



i could use a linegraph illustrating lift and duration compared to stock... time to bust out office 03...
Offline

Eric



Irish_mechanic wrote:
i could use a linegraph illustrating lift and duration compared to stock... time to bust out office 03...
do it

Online

Tone Phimma

eric02SpecV wrote:
Irish_mechanic wrote:
i could use a linegraph illustrating lift and duration compared to stock... time to bust out office 03...
do it
Haha so demanding
Offline